Paint Mixing Satinwood
Dulux colour mixing Satinwood paint gives interior wood and metal a hard-wearing, subtle sheen finish. Ideal for adding a modern effect to your home.
Remove any flaking or defective paint. Sand down to remove any sheen. Ensure the surface is clean and dry.
Treat any knots in wood with a suitable knotting solution.
Apply an appropriate Dulux primer to bare surfaces.
Surface defects should be repaired using the appropriate Polycell products.
Radiators must only be painted when cold.
Stir thoroughly before use to ensure the paint is completely mixed.
Apply 2 coats of Dulux colour mixing Satinwood using a good quality synthetic brush.
Allow 6 hours between coats, longer when cold and damp.
Where a strong colour change is involved, more coats may be required.
Newly painted doors should not be closed (tightly) until paint is fully dry.
Drying time: 2-4 hours
After use, remove as much paint as possible from brushes before cleaning with water. Store paint in dry conditions and protect from frost
A hardwearing and subtle sheen paint for interior wood and metal. Available in over 1200 colours.
Don't waste unwanted paint! Leftover product may be taken to a Community RePaint collection point. Make a small difference to someone else at communityrepaint.org.uk
Whether you need a major renovation or just a little inspiration, our interior designers are here to give you their help and expertise with every aspect of creating your ideal home.Dulux Design Service
Find the perfect colour to suit anything from your sofa to your curtains. Our tools will find your item's closest colour match and give you some suggestions of great schemes to go with it.On your iPhone