Paint Mixing Bathroom+ Soft Sheen
Coverage: Up to 14m²/litre
Dulux colour mixing Bathroom+ is formulated with Diamond Technology to be 10 times tougher than our conventional matt and silk emulsion paint. The independently laboratory tested MouldTec formulation delivers a 5 year mould-resistant paint film, so it is perfect for areas of high condensation. With Dulux colour mixing Bathroom+, you get the look you love with the toughness you need.
To get the best results with Dulux Bathroom+, make sure surfaces to be painted are sound, clean and dry (new surfaces particularly must be fully dry).
Before surface preparation, read the information in the Safety, Health And Environmental Information section about old lead paints.
Any surface defects should be filled with the appropriate Polycell Polyfilla product.
For best colour consistency, purchase sufficient mixed paint for each job including touch in at one time from the same source.
General preparation: Remove any loose or flaking paint. Where necessary, wash the surface to remove dirt, grease etc. Treat surfaces affected by mould growth with a suitable fungicidal wash. Sand down to remove any sheen.
Seal new, bare and porous surfaces with a thinned coat of Dulux Bathroom+ (10% clean water). Porous surfaces, including previously unpainted patterned textured ceiling coatings, new buildings that have a plasterboard finish and wallcoverings that are suitable for painting (not vinyl or washables) should be sealed with Dulux Plaster Sealer for best results.
Stir thoroughly with a palette knife or similar implement before use.
For normal use thinning is not required. However, in hot weather and warm environments, up to 10% clean water may be added and stirred in to ease application.
Apply 1 or 2 coats using a suitable brush or roller. Allow a minimum of 6 hours between coats. When conditions are colder, more time must be allowed for the first coat to dry. Allow a minimum of 24 hours for the paint to fully dry.
Precautions: Do not use this paint on radiators and other heated surfaces. Do not use abrasive cleaners to clean the painted surface. Vigorous scouring may impair the finish. Do not use or store the paint in extremes of temperature.
Clean the painted surface using a very soft cloth and clean soapy water. Protect the paint from frost. Very slight variation in colour may occur between different cans of coloured paint. When using more than one can it is adviseable to mix them together in a larger container or finish in a corner before starting a new can.
Drying time: 16 hours
Roller or brush
Cleaning up after painting: Remove as much paint as possible from brushes and rollers before washing with clean water.
Moisture Resistant and perfect for steamy bathrooms
Don't waste unwanted paint! Leftover product may be taken to a Community RePaint collection point. Make a small difference to someone else at communityrepaint.org.uk
Whether you need a major renovation or just a little inspiration, our interior designers are here to give you their help and expertise with every aspect of creating your ideal home.Dulux Design Service
Find the perfect colour to suit anything from your sofa to your curtains. Our tools will find your item's closest colour match and give you some suggestions of great schemes to go with it.On your iPhone